Tools

Edge Beveler Number 2 Good quality, sharp leather work tool for removing the sharp corners on leather before sowing knife sheaths and other leather projects. For rounding edges on leather. Bevel width approx 2.4 mm Edge Beveler #2 3/32in (2.4mm)This tool...

Micro-Mesh Set of 9 Sanding Pads for Knife Handle Finishing For the best results on wood, acrylic and micarta finish with Micro-mesh for a truly glossy finish. Size: 100 x 75 x 5 mm each, this set consists of 9 pads from 1500 to 12000 grit...

Kydex Pro Drill bit for 1/4" eyelets and rivets   Custom-made for perfect kydex sheath fittings, makes crisp and round holes removing the need to counter-sink. Kydex easily frays, this specialty drill bit is for making crisp holes in...

This Kydex Eyelet Flaring Set includes both the flaring die and guide tool, providing everything you need for clean and accurate installation of 1/4" eyelets. Fits standard 1/4" (6.3mm) Kydex eyelets Includes die and guide – complete set Machined...

Replacement Carbide Strips for the Knife Makers File Guide (v5) 80 x 10 x 3.7 mm carbide strips 2 x holes counter-sunk for M4 machines screws Hardened to 78 HRC One set of 2 carbide strips. These fit the "V4" and "v5" of the file guides, the type with...

Needles for Sheath Making x 5 Set of 5 "Saddle Maker Needles"for sowing leather sheaths. These are about 55 mm long, with a big eye and a thick, blunt tip which is good for sheath making. How to make a wet shaped leather sheath: https://nordicedge...

Stitch Marker, 5 mm between holes Also called over stitchers, this tool is rolled over the leather leaving a small prick mark every 5 mm. Then an awl is used to punch holes before the sheath is sown together. The tool is about 15 cm long and made of...

Awl for sheath making Small, handy awl for sheath making and marking leather. Used to punch holes around the edge of the leather when making wet-formed sheaths. The awl has a 6 cm pointed blade and a rounded, comfortable wooden handle. Using it with a...